;
Главная > Производители > Siemens > Техника автоматизации > Системы автоматизации > Промышленные системы автоматизации SIMATIC > Программируемые контроллеры > SIMATIC S7 > S7-200 > Аксессуары > SIPLUS cables 901

SIPLUS cables 901 производства Siemens

  • Intelligent RS 232/PPI multi-master cable;
    for connecting devices with RS 232 interface to the RS 485 interface of SIPLUS S7-200 modules or the PPI network; can be used as master in a multi-master PPI network

Note:

SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

 

SIPLUS cable 901

Order No.

6AG1 901-3CB30-2XA0

Order No. based on

6ES7 901-3CB30-0XA0

Ambient temperature range

- 25 ... + 70 °C;
- 25 ... + 55 °C (for applications with cUL approval)

Ambient conditions

Suitable for exceptional exposure to media (e.g. sulfur chlorine atmosphere).

Compliant with the standard for electronic equipment used on railway rolling stock (EN 50155, temperature T1, category 1).

No

Approvals

CE, cUL

Technical data

The technical data is identical to those based on modules.


The technical documentation on SIPLUS can be found here:
http://www.siemens.com/siplus-extreme

The intelligent RS 232/PPI multi-master cable can be used as a master in a multi-master PPI network. Devices with an RS 232 interface can then be connected as master to the PPI network.

 

SIPLUS Kabel 901

Order No.

6AG1 901-3CB30-2XA0

Order No. based on

6ES7 901-3CB30-0XA0

Ambient temperature range

- 25 to + 70 °C; condensation permissible

Ambient conditions

Suitable for extraordinary medial load (e.g. by chloric and sulphuric athmosperes)

Isolation

yes

Power supply

from CPU

User guidal display protocol

PPI and ASCII (Freeport); 10/11 Bit

Transmission rate through PPI-Communication

9,6, 19,2 and 187,5 kbit/s;

  • Setting

DIP-switch;
RS 232 not necessary

LED-display

yes

Necessary Software

STEP 7 Micro/WIN V3.2 ab SP4


  • 24 V DC power supply via the RS 485 interface of the SIMATIC S7-200
  • 3 LEDs for status display:
    • Tx, green: RS 232 send
    • Rx, green: RS 232 receive
    • PPI, green: RS 485 send

PPI mode:

  • Signal conversion from RS 232 to RS 485
  • Possession of send authorization token in a multi-master PPI network (PPI master)
  • Supports 10-bit modem protocol through RS 232 and DPT as well as PPI protocol through RS 485

Freeport mode

  • Signal conversion from RS 232 to RS 485
  • Switching between local and remote modes
  • Configuration in local mode using DIP switches
  • Configuration in remote mode using terminal program (e.g. MS Hyper Terminal)
  • Supports AT modem commands and PIN for Siemens modems
  • Описание : siplus s7-200 ppi кабель с рабочим температурным диапазоном -25... +70 град. цельсия на основе 6es7901-3cb30-0xa0
  • Вес (кг) : 0.3
Код Заказной номер Заказать
60714 6AG1901-3CB30-2XA0 Заказать
;