SIPLUS CPU 412H производства Siemens

CPU for SIMATIC S7-400H and S7-400F/FH
Usable in high-availability systems such as the S7-400H
Usable with F runtime license as F-capable CPU in S7-400F/FH safety-related systems
Features a combined MPI/PROFIBUS DP master interface
Features 2 slots for sync modules

Note:

SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

SIPLUS CPU 412H
Order number	6AG1 412-3HJ14-4AB0
Order No. based on	6ES7 412-3HJ14-0AB0
Ambient temperature range	0 ... +60 °C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical data	The technical data of the standard product applies except for the environmental conditions.
Ambient conditions
Relative humidity	5 ... 100 % Condensation permissible
Biologically active substances	Conformity with EN 60721‑3‑3, Class 3B2 mold and fungal spores (except fauna)
Chemically active substances	Conformity with EN 60721‑3‑3, Class 3C4 incl. salt mist and ISA–S71.04 severity level G1; G2; G3; GX ¹⁾²⁾
Mechanically active substances	Conformity with EN 60721‑3‑3, Class 3S4 including conductive sand, dust ²⁾
Air pressure (depending on the highest positive temperature range specified)	1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K

¹⁾ ISA-S71.04 severity level GX: Long-term load: SO₂ < 4.8 ppm; H₂S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O₃ < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d): SO₂ < 17.8 ppm; H₂S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O₃ < 1.0 ppm; NOX < 10.4 ppm

²⁾ The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!

The technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme

The CPU 412-3H can be used for the SIMATIC S7-400H and S7-400F/FH. It enables the establishment of fault-tolerant S7-400H systems. It can also be used for the S7-400F/FH fail-safe automation system in conjunction with the F runtime license. The integrated PROFIBUS DP interface enables direct connection as master to the PROFIBUS DP fieldbus.

The CPU 412-3H has:

A powerful processor:
The CPU achieves command runtimes as low as 75 ns per binary command.
768 KB RAM (512 KB for program, 256 KB for data);
Load memory for user programs and parameterization data of the S7-400H F/FH automation system; high-speed RAM for sequence-relevant sections of the user program
A memory card:
For expanding the integrated load memory. The load memory contains the parameterization data of the S7-400H F/FH as well as the program, and therefore requires approximately double the memory space . The result is that:
- The integrated load memory is not sufficient for large programs, which is why the memory card is often required.
  RAM and FEPROM cards are available (FEPROM for saving at zero voltage too).
Easy expandability:
Max. 65K digital and 4K analog inputs/outputs.
Combined MPI/PROFIBUS DP interface:
The MPI enables the creation of a simple network with max. 32 nodes and a data transfer rate of 187.5 Kbit/s. The CPU can establish up to 64 connections to nodes on the communication bus (C bus) and the MPI.
The PROFIBUS DP master interface enables a distributed automation configuration with high speed and simple handling. From the user's point of view, the distributed I/Os are treated like centralized I/Os (same configuration, addressing and programming).
Mode selector:
Designed as a toggle switch.
Diagnostics buffer:
The last 120 alarm and interrupt events are stored in a ring buffer for diagnostics purposes.
Real-time clock:
Diagnostics messages from the CPU are provided with the date and time of day.

Block protection:
In addition to the keylock switch, a password concept protects the user program from unauthorized access.
Integrated HMI services:
In the case of HMI devices, the user only has to specify the source and destination of the data. These are automatically transferred cyclically by the system.
Integral communications functions:
- PG/OP communication
- Extended communication (simple and fault-tolerant)

Parameterizable properties

With the STEP 7 tool "Hardware Configuration" and the installed option package S7-400H, the properties and behavior of the S7-400H including the CPUs can be parameterized, e.g.:

Multipoint-capable MPI interface:
- Determination of node addresses.
- Startup/cyclic behavior.
- Definition of maximum cycle time and communication load.
Address assignment:
Addressing of the I/O modules.
Retentive areas:
Definition of the number of retentive bit memories, counters, timers, data blocks and clock memories.
Protection level:
Definition of access authorization to program and data.
System diagnostics:
Determination of handling and scope of diagnostics messages.
Watchdog interrupts:
Setting periodicity.
Configuring of H stations.

Safety-related functions

With the F runtime license, the safety-related F user program can be compiled and run on the CPU. One license is required for each S7-400F/FH system. The scope of supply includes 2 TÜV (German technical inspectorate) stickers.

Display and information functions

Status and fault indicators:
LEDs indicate, for example, internal and external faults and operating statuses such as RUN, STOP, startup, "Master" operating mode, redundancy errors, and test function.
Test functions:
The programming device can be used to display signal states in the program execution sequence, modify process variables independently of the user program, output contents of stack memories, run through program steps individually, and disable program sections.
Information functions:
The user can obtain information about the memory capacity and operating mode of the CPU, and the current utilization of the RAM and load memory.

	6ES7 412-3HJ14-0AB0
Product version
Hardware product version	1
Firmware version	V4.5
General information
associated programming package	STEP7 V 5.3 SP2 or higher with HW update
CiR - Configuration in RUN
CiR synchronization time, basic load	150 ms
CiR synchronization time, time per I/O slave	40 µs
Supply voltage
24 V DC	No; Power supply via system power supply
Input current
from backplane bus 5 V DC, max.	1.5 A
from interface 5 V DC, max.	90 mA; At each DP interface
Power losses
Power loss, typ.	5.5 W
Memory
Work memory
integrated	768 Kibyte
integrated (for program)	512 Kibyte
integrated (for data)	256 Kibyte
expandable	No
Load memory
expandable FEPROM	Yes
expandable FEPROM, max.	64 Mbyte
integrated RAM, max.	256 Kibyte
expandable RAM	Yes
expandable RAM, max.	64 Mbyte
Backup
present	Yes
with battery	Yes; all data
without battery	No
CPU-blocks
DB
Number, max.	4 095; Number range: 1 to 4095
Size, max.	64 Kibyte
FB
Number, max.	2 048; Number range: 0 to 2047
Size, max.	64 Kibyte
FC
Number, max.	2 048; Number range: 0 to 2047
Size, max.	64 Kibyte
OB
Size, max.	64 Kibyte
Nesting depth
per priority class	24
additional within an error OB	1
CPU processing times
for bit operations, min.	0.075 µs
for word operations, min.	0.075 µs
for fixed point arithmetic, min.	0.075 µs
for floating point arithmetic, min.	0.225 µs
Counters, timers and their retentivity
S7 counter
Number	2 048
Retentivity
adjustable	Yes
lower limit	0
upper limit	2 047
preset	Z 0 to Z 7
Counting range
lower limit	0
upper limit	999
IEC counter
present	Yes
Type	SFB
S7 times
Number	2 048
Retentivity
adjustable	Yes
lower limit	0
upper limit	2 047
preset	No times retentive
Time range
lower limit	10 ms
upper limit	9 990 s
IEC timer
present	Yes
Type	SFB
Data areas and their retentivity
retentive data area, total	Total working and load memory (with backup battery)
Flag
Number, max.	8 Kibyte
Retentivity available	Yes
Retentivity preset	MB 0 to MB 15
Number of clock memories	8; (in 1 memory byte)
Local data
adjustable, max.	16 Kibyte
preset	8 Kibyte
Address area
I/O address area
Inputs	8 Kibyte
Outputs	8 Kibyte
of which, distributed
MPI/DP interface, inputs	2 Kibyte
MPI/DP interface, outputs	2 Kibyte
Process image
Inputs, adjustable	8 Kibyte
Outputs, adjustable	8 Kibyte
Inputs, default	256 byte
Outputs, default	256 byte
consistent data, max.	244 byte
Access to consistent data in process image	Yes
Subprocess images
Number of subprocess images, max.	15
Digital channels
Inputs	65 536
Outputs	65 536
Inputs, of which central	65 536
Outputs, of which central	65 536
Analog channels
Inputs	4 096
Outputs	4 096
Inputs, of which central	4 096
Outputs, of which central	4 096
Hardware configuration
Expansion devices, max.	21
Multicomputing	No
Interface modules
Number of connectable IMs (total), max.	6
Number of connectable IM 460s, max.	6
Number of connectable IM 463s, max.	4; Single mode only
Number of DP masters
integrated	1
via CP	10
Mixed mode IM + CP permitted	No
via interface module	0
Number of operable FMs and CPs (recommended)
FM	See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections
CP, point-to-point	See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections
PROFIBUS and Ethernet CPs	14; Of which max. 10 CP as DP master
Time of day
Clock
Hardware clock (real-time clock)	Yes
battery-backed and synchronizable	Yes
Resolution	1 ms
Deviation per day (buffered), max.	1.7 ms; Power off
Deviation per day (unbuffered) max.	8.6 ms; Power on
Operating hours counter
Number	8
Number/Number range	0 to 7
Range of values	0 to 32767 hours
Granularity	1 hour
retentive	Yes
Clock synchronization
supported	Yes
to MPI, master	Yes
to MPI, slave	Yes
to DP, master	Yes
to DP, slave	Yes
in AS, master	Yes
in AS, slave	Yes
1st interface
Type of interface	integrated
Physics	RS 485 / PROFIBUS + MPI
Isolated	Yes
Power supply to interface (15 to 30 V DC), max.	150 mA
Number of connection resources	MPI: 16, DP: 16
Functionality
MPI	Yes
DP master	Yes
DP slave	No
MPI
Number of connections	16
Services
PG/OP communication	Yes
Routing	Yes
Global data communication	No
S7 basic communication	No
S7 communication	Yes
Transmission rate, max.	12 Mbit/s
DP master
Number of connections, max.	16
Services
PG/OP communication	Yes
Global data communication	No
S7 basic communication	No
S7 communication	Yes
Equidistance mode support	No
SYNC/FREEZE	No
Activation/deactivation of DP slaves	No
Direct data exchange (slave-to-slave communication)	No
Transmission rate, max.	12 Mbit/s
Number of DP slaves, max.	32
Address area
Inputs, max.	2 Kibyte
Outputs, max.	2 Kibyte
User data per DP slave
User data per DP slave, max.	244 byte
Inputs, max.	244 byte
Outputs, max.	244 byte
Slots, max.	244
per slot, max.	128 byte
DP slave
Number of connections	No configuration of CPU as DP slave
3rd interface
Type of interface	Pluggable synchronization submodule (FO)
Plug-in interface modules	Synchronization submodule IF 960 6ES7 960-1AA04-0XA0
4th interface
Type of interface	Pluggable synchronization submodule (FO)
Plug-in interface modules	Synchronization submodule IF 960 6ES7 960-1AA04-0XA0
Communication functions
PG/OP communication	Yes
Number of connectable OPs without message processing	15
Number of connectable OPs with message processing	8
Global data communication
supported	No
S7 basic communication
supported	No
S7 communication
supported	Yes
as server	Yes
as client	Yes
User data per job, max.	64 Kibyte
User data per job (of which consistent), max.	462 byte; 1 variable
S5-compatible communication
supported	Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV)
User data per job, max.	8 Kibyte
User data per job (of which consistent), max.	240 byte
Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.	24/24
Standard communication (FMS)
supported	Yes; Via CP and loadable FB
Number of connections
overall	16
S7 message functions
Number of login stations for message functions, max.	8
Symbol-related messages	No
Block related messages	Yes
simultaneously active Alarm-S blocks, max.	100
Alarm 8-blocks	Yes
Number of instances for alarm 8 and S7 communication blocks, max.	600
preset, max.	300
Process control messages	Yes
Test commissioning functions
Status/control
Status/control variable	Yes
Variables	Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Number of variables, max.	70
Forcing
Forcing	Yes
Force, variables	Inputs/outputs, bit memories, distributed I/Os
Number of variables, max.	256
Status block	Yes
Single step	Yes
Number of breakpoints	4
Diagnostic buffer
present	Yes
Number of entries, max.	3 200
adjustable	Yes
preset	120
Isochronous mode
Isochronous mode	No
equidistance	No
Configuration
Configuration software
STEP 7	Yes; With hardware update as of STEP7 V5.3 SP2
programming
Programming language
LAD	Yes
FBD	Yes
STL	Yes
SCL	Yes
CFC	Yes
GRAPH	Yes
HiGraph®	Yes
Command set	see instruction list
Nesting levels	8
Know-how protection
User program protection/password protection	Yes
Dimensions
Width	50 mm
Height	290 mm
Depth	219 mm
Required slots	2
Weight
Weight, approx.	990 g

Код	Заказной номер	Описание	Вес (кг)	Заказать
60659	6AG1412-3HJ14-4AB0	siplus s7-400, модуль cpu 412-3h для тяжёлых условий применения, с конформным покрытием, на основе 6es7412-3hj14-0ab0	1.151	Заказать
110780	6ES7398-8EA00-8AA0	simatic s7-300/-400, руководство по связи s7-300/-400, немецкий язык	0.585	Заказать
110781	6ES7398-8EA00-8BA0	simatic s7-300/-400, руководство по связи s7-300/-400, английский язык	0.568	Заказать
63141	6ES7833-1CC00-6YX0	simatic s7-400f/fh, f-runtime лицензия на выполнение f-программ.кв устанавливается на каждый центральный процессор cpu 414h/ cpu 416h, используемый в системах simatc s7-400f/fh	0.047	Заказать
111123	6ES7833-1CC02-0YA5	simatic s7, f-prog-sw u.fb-lib. float. license f.1 installation r-sw, sw and docu. on cd, class a, 2 languages (g,e), executable under winxp sp2/sp3, win server 2003 sp2 reference-hw:simatic s7-400h reference-hw:simatic s7-400h	0.245	Заказать
111124	6ES7833-1CC02-0YE5	simatic s7, f-prog-sw a.fb-lib. upgrade v5.x/6.0 single license to v6.1 floating license r-sw, sw and docu. on cd, class a, 2 languages (g,e), executable under winxp sp2/sp3, win server 2003 sp2 reference-hw:simatic s7-400h cpu412h/414h/417h	0.245	Заказать
63182	6ES7901-0BF00-0AA0	simatic s7, mpi-кабель для подключения simatic s7 к программатору через mpi, длина 5m	0.274	Заказать
111168	6ES7912-0AA00-0AA0	simatic s7, пластиковые метки маркироки номеров модулей в монтажных стойках s7-300/ s7-400/ et 200m/ c7	0.006	Заказать
63251	6ES7952-1AK00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, ram, 1 мбайт	0.052	Заказать
111236	6ES7952-1AL00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, ram, 2 мбайт	0.051	Заказать
111237	6ES7952-1AM00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, ram, 4 мбайт	0.055	Заказать
63252	6ES7952-1AP00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, ram, 8 мбайт	0.052	Заказать
111238	6ES7952-1AS00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, ram, 16 мбайт	0.051	Заказать
63253	6ES7952-1AY00-0AA0	simatic s7, карта памяти ram для s7-400, длинная версия, 64 мбайт	0.053	Заказать
63254	6ES7952-1KK00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 1 мбайт	0.051	Заказать
63255	6ES7952-1KL00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 2 мбайт	0.052	Заказать
111239	6ES7952-1KM00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 4 мбайт	0.049	Заказать
111240	6ES7952-1KP00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 8 мбайт	0.05	Заказать
63256	6ES7952-1KS00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 16 мбайт	0.052	Заказать
63257	6ES7952-1KT00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 32 мбайт	0.047	Заказать
63258	6ES7952-1KY00-0AA0	simatic s7, карта памяти для s7-400, длинное исполнение, 5в flash-eprom, 64 мбайт	0.052	Заказать
63269	6ES7972-0BA12-0XA0	simatic dp, соединитель для подключения к profibus, до 12 мбит/с, отвод кабеля под углом 90 градусов, 15.8 x 54 x 34 mm, с встроенным терминальным резистором, с функциями разделения, без гнезда для подключения программатора	0.049	Заказать
63270	6ES7972-0BA30-0XA0	simatic dp, соединитель для подключения к profibus, до 1.5 мбит/с, с наклонным отводом кабеля, 15 x 58 x 34 mm, без терминального резистора, без гнезда для подключения программатора	0.045	Заказать
111256	6ES7972-0BA42-0XA0	simatic dp, шинный соединитель для подключения к сети profibus до 12 мбит/с, с наклонным отводом кабеля, 15,8 x 54 x 39,5 mm (шxвxг), оконечное сопротивление с функц. изоляции, без разъёма для подключения pg	0.046	Заказать
111257	6ES7972-0BA52-0XA0	simatic dp, шинный оединитель для подключения к сетям profibus до 12 мбит/с, отвод кабеля под углом 90 градусов, 15,8 x 59 x 35,6 mm (шxвxг), ipcd, технология fast connect, без разъёма для подключения программатора	0.044	Заказать
111258	6ES7972-0BA52-0XB0	simatic dp,bus connector for profibus up to 12 mbit/s 90 degree angle outgoing cable, 15,8 x 59 x 35,6 mm (wxhxd), ipcd techology fast connect, without pg socket 100 pieces per packaging unit	4.5	Заказать
111260	6ES7972-0BB12-0XA0	simatic dp, соединитель для подключения к profibus, до 12 мбит/с, отвод кабеля под углом 90 градусов, 15.8 x 54 x 34 mm, с встроенным терминальным резистором, с функциями разделения, с гнездом для подключения программатора	0.056	Заказать
111261	6ES7972-0BB42-0XA0	simatic dp, шинный соединитель для подключения к сети profibus до 12 мбит/с, с наклонным отводом кабеля, 15,8 x 54 x 39,5 mm (шxвxг), оконечное сопротивление с функц. изоляции, с разъёмом для подключения pg	0.051	Заказать
63271	6ES7972-0BB52-0XA0	simatic dp, шинный оединитель для подключения к сетям profibus до 12 мбит/с, отвод кабеля под углом 90 градусов, 15,8 x 59 x 35,6 mm (шxвxг), ipcd, технология fast connect, с разъёмом для подключения программатора	0.049	Заказать
111262	6ES7972-0BB52-0XB0	simatic dp,bus connector for profibus up to 12 mbit/s 90 degree angle outgoing cable, 15,8 x 59 x 35,6 mm (wxhxd), ipcd techology fast connect, with pg socket 100 pieces per packaging unit	5	Заказать
63287	6ES7998-8XC01-8YE0	коллекция руководств simatic на cd-rom. pdf-формат, анг/ нем/ фр/ исп/ ит. язык. все руководства по s7-200/ -300/ -400/ -c7/ -logo!; simatic dp/ -pc/ -pg; step7, инстр. средствам проектирования, прогр. обеспечению runtime, simatic pcs7/ hmi/ net	0.2	Заказать
63288	6ES7998-8XC01-8YE2	коллекция руководств simatic на cd-rom, 5-языковая поддержка (без русского), служба обновления в течение 1 года	0.4	Заказать
114346	6GK1500-0EA02	simatic net, pb шинный соединитель с осевым отводом кабеля для пром. пк, simatic op, olm; скорость передачи 12 мбит/с, оконечный резистор с функциями разделения	0.104	Заказать
116945	6XV1830-0EH10	simatic net, стандартный экранированный profibus кабель для быстрого монтажа (fc), 2-жильный, поставка по метражу отрезками длиной 20 ... 1000 m	0.081	Заказать