The SITRANS P200 pressure transmitter measures the gauge and absolute pressure of liquids, gases and vapors.
The SITRANS P200 pressure transmitter for gauge and absolute pressure is used in the following industrial areas:
Application | |
Gauge and absolute pressure measurement | Liquids, gases and vapors |
Mode of operation | |
Measuring principle | Piezo-resistive measuring cell (ceramic diaphragm) |
Measured variable | Gauge and absolute pressure |
Input | |
Measuring range | |
| 1 … 60 bar g (15 … 870 psi g) 15 … 1000 psi g |
| 0.6 … 16 bar a (10 … 232 psi a) 10 … 300 psi a |
Output | |
Current signal | 4 ... 20 mA |
| (UB - 10 V) / 0.02 A |
| 7 ... 33 V DC (10 ... 30 V for Ex) |
Voltage signal | 0 ... 10 V DC |
| ≥ 10 kΩ |
| 12 ... 33 V DC |
| < 7 mA at 10 kΩ |
Characteristic curve | Linear rising |
Measuring accuracy | |
Error in measurement at limit setting incl. hysteresis and reproducibility |
|
Step response time T99 | < 5 ms |
Long-term stability | |
| 0.25 % of full-scale value/year |
Influence of ambient temperature | |
| 0.25 %/10 K of full-scale value |
| 0.005 %/g to 500 Hz in all directions |
| 0.005 %/V |
Rated conditions | |
Pressure transmitter with gasket made of: | |
| -15 ... +125 °C (5 ... 257 °F) |
| -35 ... +100 °C (-31 ... +212 °F) |
| -20 ... +100 °C (-4 ... +212 °F) |
| -40 ... +145 °C (-40 ... +293 °F), usable for drinking water |
Ambient temperature | -25 ... +85 °C (-13 ... +185 °F) |
Storage temperature | -50 ... +100 °C (-58 ... +212 °F) |
Degree of protection (to EN 60529) |
|
Electromagnetic Compatibility |
|
Design | |
Weight | Approx. 0.090 kg (0.198 lb) |
Process connections | See dimension drawings |
Electrical connections |
|
Wetted parts materials | |
| AI2O3 - 96 % |
| Stainless steel, mat. no. 1.4404 (SST 316 L) |
|
|
Non-wetted parts materials | |
| Stainless steel, mat. no. 1.4404 (SST 316 L) |
| Plastic |
| PVC |
Certificates and approvals | |
Classification according to pressure equipment directive (PED 97/23/EC) | For gases of fluid group 1 and liquids of fluid group 1; complies with requirements of article 3, paragraph 3 (sound engineering practice) |
Lloyds Register of Shipping (LR) | Applied |
Germanischer Lloyds Register of Shipping (GL) | Applied |
American Bureau of Shipping (ABS) | Applied |
Bureau Veritas (BV) | Applied |
Det Norske Veritas (DNV) | Applied |
Drinking water approval (ACS) | Applied |
GOST | Applied |
Explosion protection | |
Intrinsic safety "i" (only with current output) | Ex II 1/2 G Ex ia IIC T4 GA/gb Ex II 1/2 D Ex ia IIIC T125 °C Da/Db |
EC type-examination certificate | SEV 10 ATEX 0146 |
Connection to certified intrinsically-safe resistive circuits with maximum values | Ui ≤ 30 V DC; Ii = 100 mA; Pi ≤ 0.75 W |
Effective internal inductance and capacity for versions with plugs per EN 175301-803-A and M12 | Li = 0 nH; Ci = 0 nF |
The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure. It can be used with a connector per EN 175301-803-A (IP65), a round plug M12 (IP67), a cable (IP67) or a cable quick screw connection (IP67) connected electrically. The output signal is between 4 and 20 mA or 0 and 10 V.
The pressure transmitter consists of a piezoresistive measuring cell with a diaphragm installed in a stainless steel enclosure. It can be used with a connector per EN 175301-803-A (IP65) or a round plug M12 (IP67) connected electrically. The output signal is between 4 and 20 mA.
The pressure transmitter measures the gauge and absolute pressure as well as the level of liquids and gases.
SITRANS P200 pressure transmitters (7MF1565-...), functional diagram
The ceramic measuring cell has a thin-film resistance bridge to which the operating pressure p is transmitted through a ceramic diaphragm.
The voltage output from the measuring cell is converted by an amplifier into an output current of 4 to 20 mA or an output voltage of 0 to 10 V DC.
The output current and voltage are linearly proportional to the input pressure.
SITRANS P200, electrical connections, dimensions in mm (inch)
SITRANS P200, process connections, dimensions in mm (inch)
Connection with current output and connector per EN 175301
Connection with current output and connector M12x1
Connection with current output and cable
Connection with current output and cable quick screw connection
Connection with voltage output and connector per EN 175301
Connection with voltage output and connector M12x1
Connection with voltage output and cable
Connection with voltage output and cable quick screw connection
The grounding connection is conductively bonded to the transmitter enclosure
Connection with current output and connector per EN 175301 (Ex)
Connection with current output and connector M12x1 (Ex)
| Код | Заказной номер | Заказать |
|---|---|---|
| 71415 | 7MF1565-.....-.... | Заказать |
