Блоки питания SIPLUS производства Siemens

Power supplies for SIPLUS S7-400
For conversion of AC or DC line voltages to the 5 V DC and 24 V DC operating voltages required
4 A, 10 A and 20 A output currents

Note:

SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

SIPLUS S7-400 PS
Order No.	6AG1 405-0KA02-2AA0	6AG1 407-0KR02-4AA0
Order No. based on	6ES7 405-0KA02-0AA0	6ES7 407-0KR02-0AA0
Ambient temperature range	-25 ... +70 °C	-0 ... +60 °C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical data	The technical data of the standard product applies, except for the environmental conditions
Environmental conditions
Relative humidity	5 ... 100 % Condensation permissible
Biologically active substances	Conformity with EN 60721‑3‑3, Class 3B2 mold and fungal spores (except fauna)
Chemically active substances	Conformity with EN 60721‑3‑3, Class 3C4 incl. salt mist and ISA–S71.04 severity level G1; G2; G3; GX ¹⁾²⁾
Mechanically active substances	Conformity with EN 60721‑3‑3, Class 3S4 including sand, dust ²⁾
Air pressure (depending on the highest positive temperature range specified)	1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K

¹⁾ ISA-S71.04 severity level GX: Long-term load: SO₂ < 4.8 ppm; H₂S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O₃ < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d): SO₂ < 14.8 ppm; H₂S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O₃ < 1.0 ppm; NOX < 10.4 ppm

²⁾The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!

For further technical documentation on SIPLUS, see:
http://www.siemens.com/siplus-extreme

The power supplies supply the S7-400 modules with their 5 V DC and 24 V DC operating voltages via the backplane bus.

Power supplies are available for AC line voltages of 85 to 264 V and for DC voltages of 19.2 to 300 V.

One power supply module is required per rack.
Exception:
With interfaces with current transfer, the power supply module in the central controller also supplies all modules in the expansion units.

The load voltage for supplying sensors and actuators must be made available separately.

There are also power supplies to make both the standard system and the H system fail-safe (redundant power supplies).

The power supply modules are inserted at the far left in the rack (starting from slot 1). Depending on the version, they occupy slots 1 to 3. The modules are enclosed and are cooled via natural convection.

The front of the module contains:

LED displays:
LEDS indicate internal faults, correct output voltages 5 V DC, 24 V DC, and correct back-up battery voltage.
Pushbutton for fault acknowledgment.
On/off switch for output voltages.
Battery compartment for back-up battery (batteries).
Switch for battery monitoring.
Supply voltage selector switch (not for wide-range power supplies).
Power supply connection.

The back-up battery is optional and must be ordered in addition. For power supplies at and above 10 A, two back-up batteries are recommended.

	6ES7 405-0DA02-0AA0	6ES7 405-0KA02-0AA0	6ES7 405-0KR02-0AA0	6ES7 405-0RA02-0AA0
	PS405, 24 VDC, 5 VDC/4 A	PS405, 24/48/60 VDC, 5 VDC/10 A	PS405,24/48/60 VDC,5 VDC/10 A,RED	PS405, 24/48/60 VDC, 5 VDC/20 A
Supply voltage
Rated value, 24 V DC	Yes	Yes	Yes	Yes
Rated value, 48 V DC	Yes	Yes	Yes	Yes
Rated value, 60 V DC	Yes	Yes	Yes	Yes
permissible range, lower limit (DC)	19.2 V; Dynamic 18.5 V	19.2 V; Dynamic 18.5 V	19.2 V; Dynamic 18.5 V	19.2 V; Dynamic 18.5 V
permissible range, upper limit (DC)	72 V; dynamic 75.5 V	72 V; dynamic 75.5 V	72 V; dynamic 75.5 V	72 V; dynamic 75.5 V
Mains buffering
Mains/voltage failure stored energy time	20 ms	20 ms	20 ms	20 ms
Mains buffering according to NAMUR recommendation	Yes	Yes	Yes	Yes
Input current
Rated value at 24 V DC	2 A	4 A	4 A	7 A
Rated value at 48 V DC	1 000 mA	2 A	2 A	3.2 A
Rated value at 60 V DC	800 mA	1.6 A	1.6 A	2.5 A
Inrush current, max.	18 A; Full width at half maximum 20 ms	18 A; Full width at half maximum 20 ms	18 A; Full width at half maximum 20 ms	56 A; Full width at half maximum 1.5 ms
Output voltage
Rated value, 5 V DC	Yes	Yes	Yes	Yes
Rated value, 24 V DC	Yes	Yes	Yes	Yes
Output current
for backplane bus (5 V DC), max.	4 A; no base load required	10 A; no base load required	10 A; no base load required	20 A; no base load required
for backplane bus (24 V DC), max.	0.5 A; idling-proof	1 A; idling-proof	1 A; idling-proof	1 A; idling-proof
Short-circuit protection	Yes	Yes	Yes	Yes
Power
Power consumption, typ.	48 W	95 W	95 W	168 W
Power losses
Power loss, typ.	16 W	20 W	20 W	44 W
Backup battery
Backup battery
Backup battery (optional)	Yes; 1 x lithium AA; 3.6 V/2.3 Ah	Yes; 2 x lithium AA; 3.6 V/2.3 Ah	Yes; 2 x lithium AA; 3.6 V/2.3 Ah	Yes; 2 x lithium AA; 3.6 V/2.3 Ah
Galvanic isolation
primary/secondary	Yes	Yes	Yes	Yes
Degree and class of protection
Protection class	1; with protective conductor	1; with protective conductor	1; with protective conductor	1; with protective conductor
Standards, approvals, certificates
FM approval	Yes; Ta: 0 °C to 60 °C T4	Yes; Ta: 0 °C to 60 °C T4	Yes; Ta: 0 °C to 60 °C T4	Yes; Ta: 0 °C to 60 °C T4
Connection method
Connecting cables/cross sections	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm
Dimensions
Width	25 mm	50 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm	290 mm
Depth	217 mm	217 mm	217 mm	217 mm
Required slots	1	2	2	2
Weight
Weight, approx.	760 g	1 200 g	1 200 g	1 300 g

	6ES7 407-0DA02-0AA0	6ES7 407-0KA02-0AA0	6ES7 407-0KR02-0AA0	6ES7 407-0RA02-0AA0
Supply voltage
Rated value, 110 V DC	Yes; Rated value 120 V DC	Yes; Rated value 120 V DC	Yes; Rated value 120 V DC	Yes; Rated value 120 V DC
Rated value, 230 V DC	Yes	Yes	Yes	Yes
permissible range, lower limit (DC)	88 V	88 V	88 V	88 V
permissible range, upper limit (DC)	300 V	300 V	300 V	300 V
Rated value, 120 V AC	Yes	Yes	Yes	Yes
Rated value, 230 V AC	Yes	Yes	Yes	Yes
Line frequency
Rated value 50 Hz	Yes	Yes	Yes	Yes
Rated value 60 Hz	Yes	Yes	Yes	Yes
permissible range, lower limit	47 Hz	47 Hz	47 Hz	47 Hz
permissible range, upper limit	63 Hz	63 Hz	63 Hz	63 Hz
Mains buffering
Mains/voltage failure stored energy time	20 ms	20 ms	20 ms	20 ms
Mains buffering according to NAMUR recommendation	Yes	Yes	Yes	Yes
Input current
Rated value at 110 V DC	350 mA; at 120 V DC	1 A; at 120 V DC	1 A; at 120 V DC	1.4 A; at 120 V DC
Rated value at 230 V DC	190 mA	0.5 A	0.5 A	0.7 A
Rated value at 120 V AC	0.42 A	0.9 A	0.9 A	1.4 A
Rated value at 230 V AC	0.22 A	0.5 A	0.5 A	0.7 A
Inrush current, max.	8.25 A; Full width at half maximum 5 ms	63 A; Full width at half maximum 1 ms	63 A; Full width at half maximum 1 ms	88 A; Full width at half maximum 1.1 ms
Output voltage
Rated value, 5 V DC	Yes	Yes	Yes	Yes
Rated value, 24 V DC	Yes	Yes	Yes	Yes
Output current
for backplane bus (5 V DC), max.	4 A; no base load required	10 A; no base load required	10 A; no base load required	20 A; no base load required
for backplane bus (24 V DC), max.	0.5 A; idling-proof	1 A; idling-proof	1 A; idling-proof	1 A; idling-proof
Short-circuit protection	Yes	Yes	Yes	Yes
Power
Power consumption, typ.	52 W	95 W	95 W	158 W
Power losses
Power loss, typ.	20 W	20 W	20 W	35 W
Backup battery
Backup battery
Backup battery (optional)	Yes; 1 x lithium AA; 3.6 V/2.3 Ah	Yes; 2 x lithium AA; 3.6 V/2.3 Ah	Yes; 2 x lithium AA; 3.6 V/2.3 Ah	Yes; 2 x lithium AA; 3.6 V/2.3 Ah
Galvanic isolation
primary/secondary	Yes	Yes	Yes	Yes
EMC
Compliance with line harmonic distortion limits
Observance of line harmonic distortion acc. to IEC 61000-3-2, IEC 61000-3-3	Yes	Yes	Yes	Yes
Degree and class of protection
Protection class	1; with protective conductor	1; with protective conductor	1; with protective conductor	1; with protective conductor
Standards, approvals, certificates
FM approval	Yes; Ta: 0 °C to 60 °C T4	Yes; Ta: 0 °C to 60 °C T4	Yes; Ta: 0 °C to 60 °C T4	Yes; Ta: 0 °C to 60 °C T4
Connection method
Connecting cables/cross sections	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm	3 x 1.5 mm2, solid or stranded wire with end sleeve, external diameter 3 to 9 mm
Dimensions
Width	25 mm	50 mm	50 mm	50 mm
Height	290 mm	290 mm	290 mm	290 mm
Depth	217 mm	217 mm	217 mm	217 mm
Required slots	1	2	2	2
Weight
Weight, approx.	760 g	1 200 g	1 200 g	1 300 g

Brochures

Information material for downloading can be found in the Internet:

http://www.siemens.com/simatic/printmaterial

Код	Заказной номер	Описание	Вес (кг)	Заказать
60658	6AG1407-0KR02-4AA0	siplus резервируемый блок питания ps407 10a, для тяжёлых рабочих условий, на основе блока 6es7407-0kr02-0aa0	1.455	Заказать
62367	6ES7490-0AA00-0AA0	simatic s7-400, запасной съемный соединитель подключения цепей питания к ps405 4a/10a/20a	0.049	Заказать
110825	6ES7490-0AB00-0AA0	simatic s7-400, запасной съемный соединитель подключения цепей питания к ps407 4a/10a/20a	0.051	Заказать
63265	6ES7971-0BA00	simatic s7-400, буферная батарея 3.6в/1.9ачас, для ps 405 4a/10a/20a и ps 407 4a/10a/20a. для 4 а блока питания необходима одна, для 10- и 20 а блоков питания - две буферные батареи	0.027	Заказать