1PH4 for SINAMICS S120 for machine tools производства Siemens

Servomotor

1PH4

Cooling

Water cooling

Coolant inlet temperature

Because of the formation of condensation, we recommend a coolant inlet temperature of approx. 30 °C (86 °F), depending on the ambient conditions.

Cooling water pressure at inlet, max.

7 bar

Temperature monitoring

2 KTY 84 temperature sensors in the stator winding,
1 as reserve

Insulation of the stator winding in accordance with EN 60034‑1 (IEC 60034‑1)

Temperature class 155 (F) for a coolant inlet temperature of up to 30 °C (86 °F)

Encoder system, built-in

• Without DRIVE-CLiQ interface

• Incremental encoder sin/cos 1 V_pp 2048 S/R
  with C and D tracks (encoder IC2048S/R)
• Incremental encoder sin/cos 1 V_pp 2048 S/R
  without C and D tracks (encoder IN2048S/R)
• Absolute encoder 2048 S/R single-turn, 4096 revolutions multi-turn, with EnDat interface (encoder AM2048S/R)

• With DRIVE-CLiQ interface

• 22 bit incremental encoder
  (resolution 4194304, 2048 S/R internal) + 11 bit commutation position (encoder IC22DQ)
• 22 bit incremental encoder
  (resolution 4194304, 2048 S/R internal) without commutation position (encoder IN22DQ)
• 22 bit absolute encoder single-turn
  (resolution 4194304, 2048 S/R internal) + 12 bit multi-turn (traversing range 4096 revolutions) (encoder AM22DQ)

Type of construction in accordance with EN 60034‑7 (IEC 60034‑7)

IM B35 (IM V15, IM V35)

Terminal box location
(view DE)¹⁾

Top, rotatable 4 × 90°

Terminal box connection type

• Motor

Terminals in terminal box

• Encoder system and PTC thermistor

12-pin/17-pin circular socket (without mating connector) or DRIVE-CLiQ

Bearing version on DE²⁾

Duplex bearing for belt or coupling output (minimum cantilever force required)

Vibration magnitude in accordance with EN 60034‑14 (IEC 60034‑14)

Grade R (reduced)

Shaft and flange accuracy in accordance with DIN 42955 (IEC 60072‑1)³⁾

Tolerance N (normal)

Shaft extension DE in accordance with DIN 748‑3 (IEC 60072‑1)

Full-key balancing with keyway

Degree of protection in accordance with EN 60034‑5 (IEC 60034‑5)

IP65, IP55 on shaft exit

Sound pressure level L_pA (1 m) in accordance with EN ISO 1680
Tolerance + 3 dB

• 1PH410/1PH413

69 dB

• 1PH416

71 dB

Paint finish

Anthracite

Approvals, according to

cURus

Type

n_N

n₂²⁾

S1

S6-60 %

S6-40 %

rpm

rpm

rpm

rpm

1PH4103

1500

8600

7500

6500

1PH4105

1500

8800

7600

6500

1PH4107

1500

8600

7400

6400

1PH4133

1500

8000

7400

6000

1PH4135

1500

7400

6200

5500

1PH4137

1500

6800

5800

5000

1PH4138

1500

7800

6600

5800

1PH4163

1500

6300

5200

4500

1PH4167

1500

5200

4400

3800

1PH4168

1500

6300

5300

4600

Description

Order code

Bearing version (view drive end)
(standard = duplex bearing)

• Single bearing for coupling, for low to medium cantilever forces or planetary gearboxes (e.g. mounting of a ZF gearbox 2LG43...)⁵⁾⁶⁾

K00

Vibration magnitude in accordance with EN 60034-14 (IEC 60034-14)
(standard = vibration magnitude grade R, duplex bearing)

• Grade S with duplex bearing⁷⁾

K05⁸⁾

• Grade S with single bearing⁷⁾

K02⁸⁾

• Grade SR with single bearing⁷⁾

K03⁸⁾

Shaft and flange accuracy in accordance with DIN 42955 (IEC 60072-1)
(standard = tolerance N)

• Tolerance R⁹⁾

K04

Shaft extension DE
(standard = full-key balancing with keyway)

• Plain shaft

K42

• Half-key balancing

L69

Shaft seal DE¹⁰⁾

• Radial shaft sealing ring, oil-tight, IP65

K18

Brake⁶⁾

• With holding brake mounted on DE

G46

Terminal box location
view DE (standard = top)

• Right side, cable entry from below⁶⁾

K09¹¹⁾

• Left side, cable entry from below⁶⁾

K10¹¹⁾

Rotation of terminal box on its own axis

• By 90°, cable entry form drive end¹²⁾

K83

• By 90°, cable entry form non-drive end¹²⁾

K84

• By 180°, cable entry form above¹²⁾

K85¹¹⁾

Speed¹³⁾

• With increased maximum speed and half-key balancing

L37

Other

• Second rating plate, separately packed

K31

1PH410

6 l/min (1.59 US gallons)

G 1/4“

1PH413

8 l/min (2.11 US gallons)

G 3/8“

1PH416

10 l/min (2.64 US gallons)

G 1/2“