;
Главная > Производители > Siemens > Системные решения и продукты для отраслей > Mechanical engineering > Компоненты автоматизации для станков > SINUMERIK 828D BASIC T/BASIC M with SINAMICS S120 Combi > SINAMICS S120 Combi drive system > SMC20 Sensor Module Cabinet-Mounted

SMC20 Sensor Module Cabinet-Mounted производства Siemens

SMC20 Sensor Module Cabinet-Mounted

The SMC20 Sensor Module Cabinet-Mounted is required to evaluate the encoder signals of motors without a DRIVE‑CLiQ interface. External encoders can also be connected via the SMC20.

The following encoder signals can be evaluated:

  • Incremental encoder sin/cos 1 Vpp
  • Absolute encoder EnDat
  • SSI encoder with incremental signals sin/cos 1 Vpp

The motor temperature can also be detected using KTY84‑130 or PTC thermistors.

SMC20 Sensor Module Cabinet‑Mounted

6SL3055-0AA00-5BA3

Current requirement, max.

At 24 V DC,
not taking encoder into account

0.2 A

  • Conductor cross-section, max.

2.5 mm2

  • Fuse protection, max.

20 A

Power loss, max.

10 W

Encoders which can be evaluated

  • Incremental encoder sin/cos 1 Vpp
  • Absolute encoder EnDat
  • SSI encoder with incremental signals sin/cos 1 Vpp
  • Encoder supply

5 V DC/0.35 A

  • Encoder frequency incremental signals, max.

500 kHz

  • Signal subdivision (interpolation), max.

16384 times (14 bit)

  • SSI baud rate

100 kBaud

  • Cable length to encoder, max.

100 m (328 ft)

PE connection

M4 screw

Dimensions

 

  • Width

30 mm (1.18 in)

  • Height

150 mm (5.91 in)

  • Depth

111 mm (4.37 in)

Weight, approx.

0.45 kg (1 lb)

Approvals, according to

cULus


The SMC20 Sensor Module Cabinet-Mounted features the following interfaces as standard:

  • 1 DRIVE-CLiQ interface
  • 1 encoder connection, including motor temperature detection (KTY84‑130 or PTC) via SUB-D connector
  • 1 connection for the electronics power supply via the 24 V DC power supply connector
  • 1 PE/protective conductor connection

The status of the SMC20 Sensor Module Cabinet-Mounted is indicated via a multi-color LED.

The SMC20 Sensor Module Cabinet-Mounted can be snapped onto a TH 35 top-hat rail according to EN 60715 (IEC 60715).

The signal cable shield is connected via the encoder system connector and can also be connected to the SMC20 Sensor Module Cabinet-Mounted via a shield connection terminal, e.g. Phoenix Contact type SK8 or Weidmüller type KLBÜ CO 1.

The SMC20 Sensor Module Cabinet-Mounted communicates with a Control Unit via DRIVE-CLiQ.

  • Описание : sinamics s120 модуль датчика smc20 панель оценки инкрементального датчика: sin/cos 1vpp абсолютный датчик: endat без кабеля drive-cliq монтажная ширина 30 mm
  • Вес (кг) : 0.411
Код Заказной номер Заказать
115640 6SL3055-0AA00-5BA3 Заказать
;