SIPLUS SCALANCE X-300 managed производства Siemens

The SCALANCE X-300 product line consists of compact Industrial Ethernet switches for establishing electrical and/or optical line, ring and star topologies at 10/100/1000 Mbit/s
Three integral electrical and/or optical Gigabit Ethernet interfaces (10/100/1000 Mbit/s) and seven electrical Fast Ethernet interfaces (10/100 Mbit/s) for interconnecting several switches to establish Gigabit or Fast Ethernet rings or to connect Industrial Ethernet nodes
High-speed media redundancy through integral redundancy manager both for Gigabit Ethernet (SCALANCE X-300, SCALANCE X-400) and Fast Ethernet (SCALANCE X-300 switches in the ring in combination with SCALANCE X-200 switches or OSM/ESM)
Switches from the SCALANCE X-300 product line support numerous IT standard and thus permit seamless integration of automation networks into existing corporate networks. Virtual local area networks (VLANs) can be constructed
The support of standardized redundancy procedures (Rapid Spanning Tree Protocol) permits redundant integration into higher-level enterprise networks
By learning the multicast sources and destinations (IGMP Snooping and IGMP Querier (Internet Group Management Protocol)), SCALANCE X-300 switches can also filter multicast data traffic and thus limit the load on the network.
The ports can be configured for terminal devices that support authentication in accordance with IEEE 802.1x. Authentication is done via a RADIUS server which has to be configured accordingly and must be able to be reached via the network.
Rugged metal enclosure in S7-300 format for mounting on standard rail, S7-300 standard mounting rail or for direct wall mounting in various positions
Compact, space-saving design for installation in control cabinet
Rugged, industry-standard station connections with PROFINET-compatible RJ45 connectors that offer additional strain relief and bending strain relief thanks to latching on the housing
Redundant power supply for protection against power failure
Diagnostics on the device by means of LEDs (power, link status, data traffic, fault, redundancy manager)
Fault signaling contact, can be easily set by means of the SELECT/SET pushbutton for simple display of faults
The devices feature PROFINET diagnostics, SNMP access, integrated web server and automatic e-mail sending function for remote diagnosis and signaling via the network.

Note:

SIPLUS extreme products are based on Siemens Industry standard products. The contents listed here were taken from the respective standard products. SIPLUS extreme-specific information was added.

	SIPLUS SCALANCE X308-2
Order number	6AG1 308-2FL00-4AA3
Order No. based on	6GK5 308-2FL00-2AA3
Ambient temperature range	-10 ... +60 °C
Conformal coating	Coating of the printed circuit boards and the electronic components
Technical data	The technical data of the standard product applies except for the environmental conditions.
Ambient conditions
Relative humidity	5 ... 100 % Condensation permissible
Biologically active substances	Conformity with EN 60721‑3‑3, Class 3B2 mold and fungal spores (except fauna)
Chemically active substances	Conformity with EN 60721‑3‑3, Class 3C4 incl. salt mist and ISA–S71.04 severity level G1; G2; G3; GX ¹⁾²⁾
Mechanically active substances	Conformity with EN 60721‑3‑3, Class 3S4 including conductive sand, dust ²⁾
Air pressure (depending on the highest positive temperature range specified)	1080 ... 795 hPa (-1000 ... +2000 m) see ambient temperature range 795 ... 658 hPa (+2000 ... +3500 m) derating 10 K 658 ... 540 hPa (+3500 ... +5000 m) derating 20 K

¹⁾ ISA-S71.04 severity level GX: Long-term load: SO₂ < 4.8 ppm; H₂S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O₃ < 0.1 ppm; NOX < 5.2 ppm
Limit value (max. 30 min/d): SO₂ < 17.8 ppm; H₂S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O₃ < 1.0 ppm; NOX < 10.4 ppm

²⁾ The supplied plug covers must remain in place over the unused interface when operated in atmospheres containing corrosive gases!

The technical documentation on SIPLUS can be found here:
http://www.siemens.de/siplus-extreme

SCALANCE X-300 products enable the establishment of switched networks both at the field level and at the control level where high data transfer rates are required in addition to high network availability and extensive diagnostics facilities. The switches are designed in degree of protection IP30 for installation in control cabinets.

The main area of application is found in high-performance plant networks with interfaces to the corporate network.

The X308-2M TS is suitable for use in railway applications due to its specification according to EN 50155.

Product versions

Switches with Fast Ethernet and Gigabit Ethernet ports

Electrical star topology with SCALANCE X310

SCALANCE X310, SCALANCE X308-2, SCALANCE X308-2LD,
SCALANCE X308-2LH, SCALANCE X308-2LH+,
SCALANCE X307-3, SCALANCE X307-3LD

For configuring electrical Industrial Ethernet line, star or ring structures
- SCALANCE X310;
  3 x 10/100/1000 Mbit/s RJ45 ports, electrical
  7 x 10/100 Mbit/s RJ45 ports, electrical
- SCALANCE X308-2;
  1 x 10/100/1000 Mbit/s RJ45 ports, electrical
  7 x 10/100 Mbit/s RJ45 ports, electrical
  2 x 1000 Mbit/s SC ports, optical, for glass FOC (multimode) up to 750 m
- SCALANCE X307-3;
  7 x 10/100 Mbit/s RJ45 ports, electrical
  3 x 1000 Mbit/s SC ports, optical, for glass FOC (multimode) up to 750 m
- SCALANCE X308-2LD;
  1 x 10/100/1000 Mbit/s RJ45 ports, electrical
  7 x 10/100 Mbit/s RJ45 ports, electrical
  2 x 1000 Mbit/s SC ports, optical, for glass FOC (singlemode) up to 10 km
- SCALANCE X307-3LD;
  7 x 10/100 Mbit/s RJ45 ports, electrical
  3 x 1000 Mbit/s SC ports, optical, for glass FOC (singlemode) up to 10 km
- SCALANCE X308-2LH;
  1 x 10/100/1000 Mbit/s RJ45 ports, electrical
  7 x 10/100 Mbit/s RJ45 ports, electrical
  2 x 1000 Mbit/s SC ports, optical, for glass FOC (singlemode) up to 40 km
- SCALANCE X308-2LH+;
  1 x 10/100/1000 Mbit/s RJ45 ports, electrical
  7 x 10/100 Mbit/s RJ45 ports, electrical
  2 x 1000 Mbit/s SC ports, optical, for glass FOC (singlemode) up to 70 km
The RJ45 ports are designed to be industry-standard with additional holding collars for connection of the IE FC RJ45 Plug 180

Connection of control cabinets with SCALANCE X308-2 in an optical gigabit ring

Fast Ethernet switches

SCALANCE X310FE
SCALANCE X304-2FE
SCALANCE X306-1LD FE
SCALANCE X320-1FE
SCALANCE X320-3 LD FE

For configuring electrical and/or optical Industrial Ethernet line, star or ring structures
- SCALANCE X310FE;
  10 x 10/100 Mbit/s RJ45 ports, electrical
- SCALANCE X304-2FE;
  4 x 10/100 Mbit/s RJ45 ports, electrical
  2 x 100 Mbit/s SC ports, optical, for glass FOC (multimode) up to 5 km
- SCALANCE X306-1LD FE;
  6 x 10/100 Mbit/s RJ45 ports, electrical
  1 x 100 Mbit/s SC port, optical, for glass FOC (singlemode) up to 26 km
- SCALANCE X320-1FE;
  20 x 10/100 Mbit/s RJ45 ports, electrical
  1 x 100 Mbit/s SC port, optical, for glass FOC (multimode) up to 5 km
- SCALANCE X320-3LD FE;
  20 x 10/100 Mbit/s RJ45 ports, electrical
  1 x 100 Mbit/s SC port, optical, for glass FOC (multimode) up to 5 km
  2 x 100 Mbit/s SC ports, optical, for glass FOC (singlemode), up to 26 km
The RJ45 ports are designed to be industry-standard with additional holding collars for connection of the IE FC RJ45 Plug 180

Redundant ring topology with SCALANCE X for wind farms

Full Gigabit switches

SCALANCE X308-2M
SCALANCE X308-2M TS

For setting up optical line, ring or star network structures with
- Four integrated electrical Gigabit Ethernet ports and
- Four modular slots for equipping with any 2-port media modules
  (see "Media modules for SCALANCE X-300")
Star hubs in the plant bus
(redundant connection possible)
SCALANCE X308-2M;
4 x 10/100/1000 Mbit/s RJ45 ports, electrical
2 x free module slots for 4 x 10/100/1000 Mbit/s media modules (electrical or optical)
SCALANCE X308-2M TS (TS = Transportation Systems);
4 x 10/100/1000 Mbit/s RJ45 ports, electrical
2 x free module slots for 4 x 10/100/1000 Mbit/s media modules (electrical or optical)
is suitable for use in railway applications due to its specification according to EN 50155

High availability of the network thanks to:
- Redundant power supply
- Redundant network structures based on fiber-optic or twisted pair cables
  (redundancy manager, standby function, and RSTP are integrated)
- Easy device replacement by means of plug-in C-PLUG swap medium
- Very fast reconfiguration of the network in the event of a fault
Lower susceptibility to failure and higher availability of the plant networking due to latching of the RJ45 FastConnect connectors in the sleeve of the RJ45 ports
Protection of investment due to integration into existing network management systems by means of standardized SNMP access
Time savings during engineering, commissioning and in the operating phase of a plant by using the configuration and diagnostics integrated in STEP 7
Simple adaptation to different network topologies, and reduction in stock keeping costs through flexibility of the partially modular versions

The SCALANCE X-300 Industrial Ethernet switches with rugged metal housing are optimized for mounting on a standard DIN rail and the S7-300 rail. Direct wall mounting in various positions is also possible. Thanks to the S7-300 housing dimensions, the devices are suitable for integration into an automation solution with S7-300 components.

The switches have:

a 4-pin terminal block for connecting the redundant power supply (2 x 24 V DC)
Row of LEDs for indicating the status information (power, link status, data traffic, fault, redundancy manager, standby manager)
A 2-pin terminal block for connecting the isolated signaling contact
SELECT/SET key for on-site configuration of the signaling contact
Slot for optional C-PLUG swap medium on the rear of the device for easy replacement in the event of a fault

The SCALANCE X-300 switches are available with the following port types:

10/100BaseTX, RJ45 connection;
RJ45 socket, automatic detection of the data rate (10 or 100 Mbit/s), with Autosensing and Autocrossover function for the connection of IE FC cables via IE FC RJ45 Plug 180 to 100 m.
10/100/1000BaseTX, RJ45 connection;
RJ45 socket, automatic detection of the data rate (10 or 100 or 1000 Mbit/s), with Autosensing and Autocrossover function for the connection of
- IE FC cables 2x2 for 100 Mbit/s via IE FC RJ45 Plug 180 up to 100 m
- IE FC cables 4x2 for 1000 Mbit/s via TP Cord and IE FC RJ45 Modular Outlet up to 100 m
- IE FC cables 4x2 for 1000 Mbit/s via IE FC RJ45 Plug 4x2 up to 100 m
1000BaseSX, SC connections;
SC ports for direct connection to the Industrial Ethernet glass fiber-optic cable up to 750 m (multimode)
1000BaseSX, SC connections;
SC ports for direct connection to the Industrial Ethernet glass fiber-optic cable up to 10 km (singlemode)
1000BaseLX, SC connections;
SC ports for direct connection to the Industrial Ethernet glass fiber-optic cable up to 40 km (singlemode)
1000BaseLX, SC connections;
SC ports for direct connection to the Industrial Ethernet glass fiber-optic cable up to 70 km (singlemode)

Increase of the network performance;
by filtering the data traffic on the basis of the Ethernet (MAC) address of the data terminals, data traffic remains local; only data intended for users of another subnetwork are forwarded by the switch.
Simple network configuration and expansion;
the switch saves the data received at the ports and forwards them independently to the destination address. Collision detection (CSMA/CD method) does not restrict the expansion of the network beyond the port.
Limiting of error spreading to the associated subnetwork;
the SCALANCE X-300 switches only pass on data with a valid checksum (CRC).
Integration of existing subnetworks with 10 Mbit/s into Fast Ethernet networks with 100 Mbit/s;
at the twisted-pair ports, the SCALANCE X-300 switch automatically recognizes the conductor pairs for transmission and reception (Autocrossover), the data transfer rate of 10 or 100 or 1000 Mbit/s, as well as full-duplex and half-duplex mode (Autonegotiation).
High-performance connection of SCALANCE X-300 switches with 1 Gbit/s;
SCALANCE X-300 switches have Gigabit Ethernet ports for connecting the switches to each other or with other Gigabit-Ethernet-enabled components (e.g. SCALANCE X-400, X-500)
Integrated redundancy manager for constructing Fast Ethernet and Gigabit Ethernet ring topologies with high-speed media redundancy.
High-speed standby redundancy;
several network segments such as rings can be interconnected redundantly with SCALANCE X-300 over the integrated standby function. Two X-300 switches are configured in a ring as a master and slave over two links to the other ring. The redundant connection can be made at 1000 Mbit/s.
Redundant interfacing to higher-level networks;
SCALANCE X-300 switches support the standardized redundancy procedures Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP). This enables a subnetwork to be connected redundantly to a higher-level network with reduced requirements for the reconfiguration time (in the order of seconds).
Support of virtual networks (VLAN);
for structuring Industrial Ethernet networks with a fast growing number of users, a physically existing network can be divided into several virtual networks.
Load limiting when multicast protocols (e.g. video transmission) are used;
through learning the multicast sources and targets (IGMP Snooping, IGMP Querier), SCALANCE X-300 switches can also filter multicast data traffic and therefore limit the load in the network.
Configuration of the ports for terminals that support authentication in accordance to IEEE 802.1x. Authentication is done via a RADIUS server which has to be configured accordingly and must be able to be reached via the network.
Support of the DHCP Option 82, 66, 67 (Dynamic Host Configuration Protocol);
this facilitates the IP address assignment of a terminal depending on the connected switch port. The IP address is assigned via a DHCP Server, which has to be configured accordingly and must be able to be reached via the network.
Support from the Access Control List (ACL);
if this function is activated for one port, the switch forwards the message frames received to this port if its source address is present in the address table. All connected nodes can be automatically entered in the ACL.
Syslog;
Syslog according to RFC 3164 is used in the IP network for transmitting short, unencrypted text messages via UDP. This requires the use of a Syslog server that must be configured appropriately and must be accessible via the network.
Time synchronization;
diagnostic messages (log table entries, e-mails) are time-stamped. The local time is standardized throughout the network by means of synchronization with a SICLOCK or SNTP time transmitter, thereby simplifying the assignment of diagnostic messages to several devices.
Fast replacement of devices in event of failure, by means of the C-PLUG switching medium

Network topology and network configuration

The SCALANCE X-300 Industrial Ethernet switches with degree of protection IP30 are typically accommodated in a control cabinet along with the nodes to be connected. The can be mixed electrically and optically in star, line and ring topologies.

The following network structures and combinations of structures can be implemented:

Fast Ethernet and Gigabit Ethernet rings with fast media redundancy;
to increase network availability, as many as 50 X-200, X-300, X-400 or X-500 switches can be cascaded in line can be connected into a ring
Several rings can be redundantly linked through the standby function
In addition, SCALANCE X-300 supports redundant connection of the ring structure to the corporate network with a rapid spanning tree.
Star topology with SCALANCE X-300 switches:
The SCALANCE X-300 switch represents a star point which can interconnect several nodes or subnets electrically or optically.

When configuring the network, it is necessary to observe the following boundary conditions:

Maximum line length between two modules for multi-mode fiber-optic conductors:
- 750 m at 1 Gbit/s
- 5 km at 100 Mbit/s
Maximum line length between two modules for single-mode fiber-optic conductors:
- 10 to 70 km at 1 Gbit/s
- 26 km at 100 Mbit/s
Maximum cable length of the TP cable between two SCALANCE X switches:
- Max. 100 m with IE FC cable 2x2 and IE FC RJ45 Plug 180
- Max. 100 m at 1 Gbit/s with IE FC Standard Cable 4x2 (90 m), IE FC RJ45 Modular Outlet and patch cable (10 m)
- Max. 10 m using patches with TP cord

Commissioning and diagnosis

Setting options on the device itself:

Redundancy manager RM;
to establish a ring, a SCALANCE X-300 is switched to RM mode. The Gigabit ports (electrical or optical) are preferably used as ring ports.
Signal mask;
the signal mask is set to the current status of the SCALANCE X-300 (setpoint) by pushbutton operation. The signal mask defines which ports and which power supplies are to be monitored. The signaling contact only reports an error when a monitored port or a monitored feeder fails (deviation of setpoint/actual status).
IP address;
the IP address is assigned via DHCP (Dynamic Host Configuration Protocol). If there is no corresponding server in the network, the IP address can be assigned using an enclosed software tool.

Diagnostic options on site:

The following status information is displayed by LEDs on site:
- Port status
- Port mode (10/100/1000 Mbit/s, full/half-duplex)
- Status of the two power supplies
- Signaling contact status
- Signal mask (setpoint status)
- RM mode
- Standby mode
The status of the signaling contact is routed externally by means of floating relay contacts. This enables, for example, the module to be monitored via an input module from a controller.
Monitoring via the Industrial Ethernet network;
the following possibilities are available:
- Remote via standard browser (Web-based management):
  Selection of SCALANCE X-300 switches via the network from a PC with browser
- Remote via SNMP V1, V2c, V3:
  Secure integration of SCALANCE X-300 switches via the network into a network management system, e.g. SINEMA Server
- Remote via PROFINET IO diagnostics:
  PROFINET diagnostic alarms from SCALANCE X-300 switches can be displayed using the relevant SIMATIC engineering tools and they can also be processed in the controller. The engineering outlay for the PLC and HMI have been drastically reduced due to the complete integration in the SIMATIC concept for system error messages.

Network management

The network management provides the following functions:

Password-protected dial-up for "Administrator" (read and write authorization) and "User" (read only)
Read-out of version and status information
Setting the signal and standby mask and address information
Fixed parameterization of the ports (data rates, half/full duplex)
Setting parameters of the VLANs and multicast services
Parameterization of the standby connections for a redundant ring link
Setting of Rapid Spanning Tree parameters
Parameterization of the web management services
Security
- Ports can be connected or disconnected
- Authentication in accordance with IEEE 802.1x
- Support from Access Control List (ACL)
Parameterization of user administration of SNMP V1, V2c, V3
Output of statistics information
Diagnosis of data traffic by means of a parameterizable mirror port with a standard commercial network analyzer
Loading of new firmware versions or of the configuration data via the network by a TFTP server or directly via HTTP/HTTPS using a Web browser
Saving the configuration data or log table via the network on a TFTP server

If faults occur in the network, the SCALANCE X-300 switch can independently send error messages (traps) to a network management system or also e-mails to a predefined network administrator.

Remote monitoring (RMON) provides the following functions:
The SCALANCE X-300 switch can collect statistics information according to the RMON groups 1 through 4. These include, for example, fault statistics that are kept for each port. This information can be read out through web-based management in the statistics sub-area.

Order No.	6GK5 304-2BD00-2AA3	6GK5 306-1BF00-2AA3	6GK5 307-3BL00-2AA3	6GK5 307-3BM00-2AA3
Product type designation	SCALANCE X304-2FE	SCALANCE X306-1LD FE	SCALANCE X307-3	SCALANCE X307-3LD
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s
Transfer rate 3	-	-	1 000 Mbit/s	1 000 Mbit/s
Interfaces
Number of electrical/optical connections for network components or terminal equipment maximum	6	7	10	10
Number of electrical connections
for network components and terminal equipment	4	6	7	7
for operator console	-	-	-	-
for alarm contact	1	1	1	1
for media module	-	-	-	-
for power supply	1	1	1	1
for redundant power supply	2	2	2	2
Design of electrical connection
for network components and terminal equipment	RJ45 port	RJ45 port	RJ45 port	RJ45 port
for operator console	-	-	-	-
for signaling contact	2-pole terminal block	2-pole terminal block	2-pole terminal block	2-pole terminal block
for power supply	4-pole terminal block	4-pole terminal block	4-pole terminal block	4-pole terminal block
Number of optical interfaces for optical waveguide
at 100 Mbit/s	2	1	-	-
at 1000 Mbit/s	-	-	3	3
Design of optical interface for optical waveguide
at 100 Mbit/s	SC port (multimode up to 5 km)	SC port (singlemode up to 26 km)	-	-
at 1000 Mbit/s	-	-	SC port (multimode up to 0.75 km)	SC port (singlemode up to 10 km)
Connectable optical power relative to 1 mW
of the transmitter output	-19 … -14 dB	-15 … -8 dB	-9.5 … -4 dB	-9.5 … -3 dB
of the receiver input maximum	-3 dB	-3 dB	-3 dB	-3 dB
Optical sensitivity relative to 1 mW of the receiver input minimum	-32 dB	-34 dB	-17 dB	-21 dB
Attenuation of fiber-optic cable transmission link minimum necessary	0 dB	0 dB	0 dB	0 dB
Range at the optical interface depending on the optical fiber used	0 … 5 km	0 … 26 km	0 … 0.75 km	0 … 10 km
design of the removable storage C-PLUG	Yes	Yes	Yes	Yes
Inputs/outputs
Operating voltage of signaling contacts at AC rated value	-	-	-	-
Operating current of signaling contacts at AC maximum	-	-	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0,1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of supply voltage redundant power supply unit	No	No	No	No
Type of voltage of supply voltage	DC	DC	DC	DC
Supply voltage external	24 V	24 V	24 V	24 V
minimum	18 V	18 V	18 V	18 V
maximum	32 V	32 V	32 V	32 V
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.26 A	0.2 A	0.4 A	0.4 A
Active power loss
at 24 V for DC	6.2 W	4.8 W	9.6 W	9.6 W
at 230 V AC	-	-	-	-
Permitted ambient conditions
Ambient temperature
during operating	-40 … +60 °C	-40 … +60 °C	-10 … +60 °C	-40 … +60 °C
during storage	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
Comment	-	-	-	-
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %	95 %	95 %
Ambient condition for (standard) operation mode	-	-	-	-
Protection class IP	IP30	IP30	IP30	IP30
Design, dimensions and weight
Design	Compact	Compact	Compact	Compact
Width	60 mm	60 mm	120 mm	120 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	123 mm	123 mm	123 mm	123 mm
Net weight	0.7 kg	0.7 kg	1.4 kg	1.4 kg
Type of mounting
Installation 19 inch	No	No	No	No
35 mm DIN rail mounting	Yes	Yes	Yes	Yes
wall mounting	Yes	Yes	Yes	Yes
S7-300 rail mounting	Yes	Yes	Yes	Yes
Type of mounting	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted
Product properties, functions, components general
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functions management, configuration
Product function
CLI	Yes	Yes	Yes	Yes
web-based management	Yes	Yes	Yes	Yes
MIB support	Yes	Yes	Yes	Yes
TRAPs via email	Yes	Yes	Yes	Yes
Configuration with STEP 7	Yes	Yes	Yes	Yes
RMON	Yes	Yes	Yes	Yes
SMTP server	Yes	Yes	Yes	Yes
Port mirroring	Yes	Yes	Yes	Yes
CoS	Yes	Yes	Yes	Yes
for IRT PROFINET IO switch	-	-	-	-
PROFINET IO diagnosis	Yes	Yes	Yes	Yes
switch-managed	Yes	Yes	Yes	Yes
Protocol is supported
Telnet	Yes	Yes	Yes	Yes
HTTP	Yes	Yes	Yes	Yes
HTTPS	Yes	Yes	Yes	Yes
TFTP	Yes	Yes	Yes	Yes
FTP	Yes	Yes	Yes	Yes
BOOTP	Yes	Yes	Yes	Yes
SNMP v1	Yes	Yes	Yes	Yes
SNMP v2	Yes	Yes	Yes	Yes
SNMP v3	Yes	Yes	Yes	Yes
IGMP (snooping/querier)	Yes	Yes	Yes	Yes
GMRP	Yes	Yes	Yes	Yes
DCP	Yes	Yes	Yes	Yes
LLDP	Yes	Yes	Yes	Yes
Identification & maintenance
I&M0 - device-specific information	Yes	Yes	Yes	Yes
I&M1 - plant identification/location name	Yes	Yes	Yes	Yes
Product functions Diagnosis
Product function
Port diagnostics	Yes	Yes	Yes	Yes
Statistics Packet Size	Yes	Yes	Yes	Yes
Statistics packet type	Yes	Yes	Yes	Yes
Error statistics	Yes	Yes	Yes	Yes
SysLog	Yes	Yes	Yes	Yes
Product functions VLAN
Product function
VLAN - port based	Yes	Yes	Yes	Yes
VLAN dynamic	Yes	Yes	Yes	Yes
Number of VLANs maximum	255	255	255	255
Number of VLANs - dynamic maximum	255	255	255	255
Protocol is supported GVRP	Yes	Yes	Yes	Yes
Product functions DHCP
Product function
DHCP client	Yes	Yes	Yes	Yes
DHCP Option 82	Yes	Yes	Yes	Yes
DHCP Option 66	Yes	Yes	Yes	Yes
DHCP Option 67	Yes	Yes	Yes	Yes
Product functions Redundancy
Product function
Ring redundancy	Yes	Yes	Yes	Yes
Redundancy manager	Yes	Yes	Yes	Yes
Standby redundancy	Yes	Yes	Yes	Yes
HSR redundancy protocol	Yes	Yes	Yes	Yes
MRP redundancy protocol	Yes	Yes	Yes	Yes
redundancy procedure STP	Yes	Yes	Yes	Yes
RSTP redundancy protocol	Yes	Yes	Yes	Yes
Passive listening	Yes	Yes	Yes	Yes
Protocol is supported
STP/RSTP	Yes	Yes	Yes	Yes
STP	Yes	Yes	Yes	Yes
RSTP	Yes	Yes	Yes	Yes
RSTP big network support	Yes	Yes	Yes	Yes
LACP	Yes	Yes	Yes	Yes
Product functions Security
Product function
ACL - port/MAC-based	Yes	Yes	Yes	Yes
IEEE 802.1x (radius)	Yes	Yes	Yes	Yes
Broadcast/Multicast/Unicast Limiter	Yes	Yes	Yes	Yes
broadcast blocking	Yes	Yes	Yes	Yes
Protocol is supported SSH	Yes	Yes	Yes	Yes
Product functions Time
Product function SICLOCK support	Yes	Yes	Yes	Yes
Protocol is supported
NTP	No	No	No	No
SNTP	Yes	Yes	Yes	Yes
IEEE 1588 profile default	No	No	No	No
IEEE 1588 profile gPTP	-	-	-	-
IEEE 1588 profile PSRC	-	-	-	-
Type of time synchronization	-	-	-	-
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4
for emitted interference	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)
for interference immunity	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005
Verification of suitability	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007
CE mark	Yes	Yes	Yes	Yes
C-Tick	Yes	Yes	Yes	Yes
Railway application in accordance with EN 50155	-	-	-	-
Railway application in accordance with EN 50124-1	-	-	-	-
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	-	-	Yes	Yes
Bureau Veritas (BV)	-	-	Yes	Yes
Det Norske Veritas (DNV)	-	-	Yes	Yes
Germanische Lloyd (GL)	-	-	Yes	Yes
Lloyds Register of Shipping (LRS)	-	-	Yes	Yes
Nippon Kaiji Kyokai (NK)	-	-	Yes	Yes

Order No.	6GK5 308-2FL00-2AA3	6GK5 308-2FM00-2AA3	6GK5 308-2FN00-2AA3	6GK5 308-2FP00-2AA3
Product type designation	SCALANCE X308-2	SCALANCE X308-2LD	SCALANCE X308-2LH	SCALANCE X308-2LH+
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s
Transfer rate 3	1 000 Mbit/s	1 000 Mbit/s	1 000 Mbit/s	1 000 Mbit/s
Interfaces
Number of electrical/optical connections for network components or terminal equipment maximum	10	10	10	10
Number of electrical connections
for network components and terminal equipment	8	8	8	8
for operator console	-	-	-	-
for alarm contact	1	1	1	1
for media module	-	-	-	-
for power supply	1	1	1	1
for redundant power supply	2	2	2	2
Design of electrical connection
for network components and terminal equipment	RJ45 port (1 x 1GE, 7 x FE)	RJ45 port (1 x 1GE, 7 x FE)	RJ45 port (1 x 1GE, 7 x FE)	RJ45 port (1 x 1GE, 7 x FE)
for operator console	-	-	-	-
for signaling contact	2-pole terminal block	2-pole terminal block	2-pole terminal block	2-pole terminal block
for power supply	4-pole terminal block	4-pole terminal block	4-pole terminal block	4-pole terminal block
Number of optical interfaces for optical waveguide
at 100 Mbit/s	-	-	-	-
at 1000 Mbit/s	2	2	2	2
Design of optical interface for optical waveguide
at 100 Mbit/s	-	-	-	-
at 1000 Mbit/s	SC port (multimode up to 0.75 km)	SC port (singlemode up to 10 km)	SC port (singlemode up to 40 km)	SC port (singlemode up to 70 km)
Connectable optical power relative to 1 mW
of the transmitter output	-9.5 … -4 dB	-9.5 … -3 dB	-6 … +0 dB	0 … 5 dB
of the receiver input maximum	-3 dB	-3 dB	-3 dB	-3 dB
Optical sensitivity relative to 1 mW of the receiver input minimum	-17 dB	-21 dB	-23 dB	-23 dB
Attenuation of fiber-optic cable transmission link minimum necessary	0 dB	0 dB	3 dB	8 dB
Range at the optical interface depending on the optical fiber used	0 … 0.75 km	0 … 10 km	8 … 40 km	30 … 70 km
design of the removable storage C-PLUG	Yes	Yes	Yes	Yes
Inputs/outputs
Operating voltage of signaling contacts at AC rated value	-	-	-	-
Operating current of signaling contacts at AC maximum	-	-	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0.1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of supply voltage redundant power supply unit	No	No	No	No
Type of voltage of supply voltage	DC	DC	DC	DC
Supply voltage external	24 V	24 V	24 V	24 V
minimum	18 V	18 V	18 V	18 V
maximum	32 V	32 V	32 V	32 V
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.4 A	0.4 A	0.4 A	0.4 A
Active power loss
at 24 V for DC	9.6 W	9.6 W	9.6 W	9.6 W
at 230 V AC	-	-	-	-
Permitted ambient conditions
Ambient temperature
during operating	-10 … +60 °C	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C
during storage	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
Comment	-	-	-	-
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %	95 %	95 %
Ambient condition for (standard) operation mode	-	-	-	-
Protection class IP	IP30	IP30	IP30	IP30
Design, dimensions and weight
Design	Compact	Compact	Compact	Compact
Width	120 mm	120 mm	120 mm	120 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	123 mm	123 mm	123 mm	123 mm
Net weight	1.4 kg	1.4 kg	1.4 kg	1.4 kg
Type of mounting
Installation 19 inch	No	No	No	No
35 mm DIN rail mounting	Yes	Yes	Yes	Yes
wall mounting	Yes	Yes	Yes	Yes
S7-300 rail mounting	Yes	Yes	Yes	Yes
Type of mounting	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted
Product properties, functions, components general
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functions management, configuration
Product function
CLI	Yes	Yes	Yes	Yes
web-based management	Yes	Yes	Yes	Yes
MIB support	Yes	Yes	Yes	Yes
TRAPs via email	Yes	Yes	Yes	Yes
Configuration with STEP 7	Yes	Yes	Yes	Yes
RMON	Yes	Yes	Yes	Yes
SMTP server	Yes	Yes	Yes	Yes
Port mirroring	Yes	Yes	Yes	Yes
CoS	Yes	Yes	Yes	Yes
for IRT PROFINET IO switch	-	-	-	-
PROFINET IO diagnosis	Yes	Yes	Yes	Yes
switch-managed	Yes	Yes	Yes	Yes
Protocol is supported
Telnet	Yes	Yes	Yes	Yes
HTTP	Yes	Yes	Yes	Yes
HTTPS	Yes	Yes	Yes	Yes
TFTP	Yes	Yes	Yes	Yes
FTP	Yes	Yes	Yes	Yes
BOOTP	Yes	Yes	Yes	Yes
SNMP v1	Yes	Yes	Yes	Yes
SNMP v2	Yes	Yes	Yes	Yes
SNMP v3	Yes	Yes	Yes	Yes
IGMP (snooping/querier)	Yes	Yes	Yes	Yes
GMRP	Yes	Yes	Yes	Yes
DCP	Yes	Yes	Yes	Yes
LLDP	Yes	Yes	Yes	Yes
Identification & maintenance
I&M0 - device-specific information	Yes	Yes	Yes	Yes
I&M1 - plant identification/location name	Yes	Yes	Yes	Yes
Product functions Diagnosis
Product function
Port diagnostics	Yes	Yes	Yes	Yes
Statistics Packet Size	Yes	Yes	Yes	Yes
Statistics packet type	Yes	Yes	Yes	Yes
Error statistics	Yes	Yes	Yes	Yes
SysLog	Yes	Yes	Yes	Yes
Product functions VLAN
Product function
VLAN - port based	Yes	Yes	Yes	Yes
VLAN dynamic	Yes	Yes	Yes	Yes
Number of VLANs maximum	255	255	255	255
Number of VLANs - dynamic maximum	255	255	255	255
Protocol is supported GVRP	Yes	Yes	Yes	Yes
Product functions DHCP
Product function
DHCP client	Yes	Yes	Yes	Yes
DHCP Option 82	Yes	Yes	Yes	Yes
DHCP Option 66	Yes	Yes	Yes	Yes
DHCP Option 67	Yes	Yes	Yes	Yes
Product functions Redundancy
Product function
Ring redundancy	Yes	Yes	Yes	Yes
Redundancy manager	Yes	Yes	Yes	Yes
Standby redundancy	Yes	Yes	Yes	Yes
HSR redundancy protocol	Yes	Yes	Yes	Yes
MRP redundancy protocol	Yes	Yes	Yes	Yes
redundancy procedure STP	Yes	Yes	Yes	Yes
RSTP redundancy protocol	Yes	Yes	Yes	Yes
Passive listening	Yes	Yes	Yes	Yes
Protocol is supported
STP/RSTP	Yes	Yes	Yes	Yes
STP	Yes	Yes	Yes	Yes
RSTP	Yes	Yes	Yes	Yes
RSTP big network support	Yes	Yes	Yes	Yes
LACP	Yes	Yes	Yes	Yes
Product functions Security
Product function
ACL - port/MAC-based	Yes	Yes	Yes	Yes
IEEE 802.1x (radius)	Yes	Yes	Yes	Yes
Broadcast/Multicast/Unicast Limiter	Yes	Yes	Yes	Yes
broadcast blocking	Yes	Yes	Yes	Yes
Protocol is supported SSH	Yes	Yes	Yes	Yes
Product functions Time
Product function SICLOCK support	Yes	Yes	Yes	Yes
Protocol is supported
NTP	No	No	No	No
SNTP	Yes	Yes	Yes	Yes
IEEE 1588 profile default	No	No	No	No
IEEE 1588 profile gPTP	-	-	-	-
IEEE 1588 profile PSRC	-	-	-	-
Type of time synchronization	-	-	-	-
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4
for emitted interference	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)
for interference immunity	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005
Verification of suitability	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007
Verification of suitability
CE mark	Yes	Yes	Yes	Yes
C-Tick	Yes	Yes	Yes	Yes
Railway application in accordance with EN 50155	-	-	-	-
Railway application in accordance with EN 50124-1	-	-	-	-
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	Yes	Yes	Yes	Yes
Bureau Veritas (BV)	Yes	Yes	Yes	Yes
Det Norske Veritas (DNV)	Yes	Yes	Yes	Yes
Germanische Lloyd (GL)	Yes	Yes	Yes	Yes
Lloyds Register of Shipping (LRS)	Yes	Yes	Yes	Yes
Nippon Kaiji Kyokai (NK)	Yes	Yes	Yes	Yes

Order No.	6GK5 310-0BA00-2AA3	6GK5 310-0FA00-2AA3	6GK5 320-1BD00-2AA3	6GK5 320-3BF00-2AA3
Product type designation	SCALANCE X310FE	SCALANCE X310	SCALANCE X320-1FE	SCALANCE X320-3LD FE
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s	100 Mbit/s	100 Mbit/s
Transfer rate 3	-	1 000 Mbit/s	-	-
Interfaces
Number of electrical/optical connections for network components or terminal equipment maximum	10	10	21	23
Number of electrical connections
for network components and terminal equipment	10	10	20	20
for operator console	-	-	-	-
for alarm contact	1	1	1	1
for media module	-	-	-	-
for power supply	1	1	1	1
for redundant power supply	2	2	2	2
Design of electrical connection
for network components and terminal equipment	RJ45 port	RJ45 port (3 x 1GE, 7 x FE)	RJ45 port	RJ45 port
for operator console	-	-	-	-
for signaling contact	2-pole terminal block	2-pole terminal block	2-pole terminal block	2-pole terminal block
for power supply	4-pole terminal block	4-pole terminal block	4-pole terminal block	4-pole terminal block
Number of optical interfaces for optical waveguide
at 100 Mbit/s	-	-	1	3
at 1000 Mbit/s	-	-	-	-
Design of optical interface for optical waveguide
at 100 Mbit/s	-	-	SC port (multimode up to 5 km)	SC port (1 x multimode up to 5 km, 2 x singlemode up to 26 km)
at 1000 Mbit/s	-	-	-	-
Connectable optical power relative to 1 mW
of the transmitter output	- -	- -	-19 … -14 dB	-15 … -8 dB
of the receiver input maximum	-	-	-3 dB	-3 dB
Optical sensitivity relative to 1 mW of the receiver input minimum	-	-	-32 dB	-34 dB
Attenuation of fiber-optic cable transmission link minimum necessary	-	-	0 dB	0 dB
Range at the optical interface depending on the optical fiber used	- -	- -	0 … 5 km	0 … 26 km
design of the removable storage C-PLUG	Yes	Yes	Yes	Yes
Inputs/outputs
Operating voltage of signaling contacts at AC rated value	-	-	-	-
Operating current of signaling contacts at AC maximum	-	-	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0.1 A	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of supply voltage redundant power supply unit	No	No	No	No
Type of voltage of supply voltage	DC	DC	DC	DC
Supply voltage external	24 V	24 V	24 V	24 V
minimum	18 V	18 V	18 V	18 V
maximum	32 V	32 V	32 V	32 V
Product component fusing at power supply input	Yes	Yes	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.4 A	0.4 A	0.4 A	0.5 A
Active power loss
at 24 V for DC	9.6 W	9.6 W	9.6 W	12 W
at 230 V AC	-	-	-	-
Permitted ambient conditions
Ambient temperature
during operating	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C	-40 … +60 °C
during storage	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C	-40 … +70 °C
Comment	-	-	-	-
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %	95 %	95 %
Ambient condition for (standard) operation mode	-	-	-	-
Protection class IP	IP30	IP30	IP30	IP30
Design, dimensions and weight
Design	Compact	Compact	Compact	Compact
Width	120 mm	120 mm	180 mm	180 mm
Height	125 mm	125 mm	125 mm	125 mm
Depth	123 mm	123 mm	123 mm	123 mm
Net weight	1.4 kg	1.4 kg	1.65 kg	1.65 kg
Type of mounting
Installation 19 inch	No	No	No	No
35 mm DIN rail mounting	Yes	Yes	Yes	Yes
wall mounting	Yes	Yes	Yes	Yes
S7-300 rail mounting	Yes	Yes	Yes	Yes
Type of mounting	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted
Product properties, functions, components general
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functions management, configuration
Product function
CLI	Yes	Yes	Yes	Yes
web-based management	Yes	Yes	Yes	Yes
MIB support	Yes	Yes	Yes	Yes
TRAPs via email	Yes	Yes	Yes	Yes
Configuration with STEP 7	Yes	Yes	Yes	Yes
RMON	Yes	Yes	Yes	Yes
SMTP server	Yes	Yes	Yes	Yes
Port mirroring	Yes	Yes	Yes	Yes
CoS	Yes	Yes	Yes	Yes
for IRT PROFINET IO switch	-	-	-	-
PROFINET IO diagnosis	Yes	Yes	Yes	Yes
switch-managed	Yes	Yes	Yes	Yes
Protocol is supported
Telnet	Yes	Yes	Yes	Yes
HTTP	Yes	Yes	Yes	Yes
HTTPS	Yes	Yes	Yes	Yes
TFTP	Yes	Yes	Yes	Yes
FTP	Yes	Yes	Yes	Yes
BOOTP	Yes	Yes	Yes	Yes
SNMP v1	Yes	Yes	Yes	Yes
SNMP v2	Yes	Yes	Yes	Yes
SNMP v3	Yes	Yes	Yes	Yes
IGMP (snooping/querier)	Yes	Yes	Yes	Yes
GMRP	Yes	Yes	Yes	Yes
DCP	Yes	Yes	Yes	Yes
LLDP	Yes	Yes	Yes	Yes
Identification & maintenance
I&M0 - device-specific information	Yes	Yes	Yes	Yes
I&M1 - plant identification/location name	Yes	Yes	Yes	Yes
Product functions Diagnosis
Product function
Port diagnostics	Yes	Yes	Yes	Yes
Statistics Packet Size	Yes	Yes	Yes	Yes
Statistics packet type	Yes	Yes	Yes	Yes
Error statistics	Yes	Yes	Yes	Yes
SysLog	Yes	Yes	Yes	Yes
Product functions VLAN
Product function
VLAN - port based	Yes	Yes	Yes	Yes
VLAN dynamic	Yes	Yes	Yes	Yes
Number of VLANs maximum	255	255	255	255
Number of VLANs - dynamic maximum	255	255	255	255
Protocol is supported GVRP	Yes	Yes	Yes	Yes
Product functions DHCP
Product function
DHCP client	Yes	Yes	Yes	Yes
DHCP Option 82	Yes	Yes	Yes	Yes
DHCP Option 66	Yes	Yes	Yes	Yes
DHCP Option 67	Yes	Yes	Yes	Yes
Product functions Redundancy
Product function
Ring redundancy	Yes	Yes	Yes	Yes
Redundancy manager	Yes	Yes	Yes	Yes
Standby redundancy	Yes	Yes	Yes	Yes
HSR redundancy protocol	Yes	Yes	Yes	Yes
MRP redundancy protocol	Yes	Yes	Yes	Yes
redundancy procedure STP	Yes	Yes	Yes	Yes
RSTP redundancy protocol	Yes	Yes	Yes	Yes
Passive listening	Yes	Yes	Yes	Yes
Protocol is supported
STP/RSTP	Yes	Yes	Yes	Yes
STP	Yes	Yes	Yes	Yes
RSTP	Yes	Yes	Yes	Yes
RSTP big network support	Yes	Yes	Yes	Yes
LACP	Yes	Yes	Yes	Yes
Product functions Security
Product function
ACL - port/MAC-based	Yes	Yes	Yes	Yes
IEEE 802.1x (radius)	Yes	Yes	Yes	Yes
Broadcast/Multicast/Unicast Limiter	Yes	Yes	Yes	Yes
broadcast blocking	Yes	Yes	Yes	Yes
Protocol is supported SSH	Yes	Yes	Yes	Yes
Product functions Time
Product function SICLOCK support	Yes	Yes	Yes	Yes
Protocol is supported
NTP	No	No	No	No
SNTP	Yes	Yes	Yes	Yes
IEEE 1588 profile default	No	No	No	No
IEEE 1588 profile gPTP	-	-	-	-
IEEE 1588 profile PSRC	-	-	-	-
Type of time synchronization	-	-	-	-
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4
for emitted interference	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)	EN 61000-6-4:2007 (Class A)
for interference immunity	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005	EN 61000-6-2:2005
Verification of suitability	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2:2005, EN 61000-6-4:2007
CE mark	Yes	Yes	Yes	Yes
C-Tick	Yes	Yes	Yes	Yes
Railway application in accordance with EN 50155	-	-	-	-
Railway application in accordance with EN 50124-1	-	-	-	-
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	Yes	Yes	-	-
Bureau Veritas (BV)	Yes	Yes	-	-
Det Norske Veritas (DNV)	Yes	Yes	-	-
Germanische Lloyd (GL)	Yes	Yes	-	-
Lloyds Register of Shipping (LRS)	Yes	Yes	-	-
Nippon Kaiji Kyokai (NK)	Yes	Yes	-	-

Order No.	6GK5 308-2GG00-2AA2	6GK5 308-2GG00-2CA2
Product type designation	SCALANCE X308-2M	SCALANCE X308-2M TS
Transmission rate
Transfer rate 1	10 Mbit/s	10 Mbit/s
Transfer rate 2	100 Mbit/s	100 Mbit/s
Transfer rate 3	1 000 Mbit/s	1 000 Mbit/s
Interfaces
Number of electrical/optical connections for network components or terminal equipment maximum	8	8
Number of electrical connections
for network components and terminal equipment	4	4
for operator console	-	-
for alarm contact	1	1
for media module	2	2
for power supply	1	1
for redundant power supply	1	1
Design of electrical connection
for network components and terminal equipment	RJ45 port	RJ45 port
for operator console	-	-
for signaling contact	2-pole terminal block	2-pole terminal block
for power supply	4-pole terminal block	4-pole terminal block
Number of optical interfaces for optical waveguide
at 100 Mbit/s	-	-
at 1000 Mbit/s	-	-
Design of optical interface for optical waveguide
at 100 Mbit/s	Dependent on selected media modules	Dependent on selected media modules
at 1000 Mbit/s	Dependent on selected media modules	Dependent on selected media modules
Connectable optical power relative to 1 mW
of the transmitter output	- -	- -
of the receiver input maximum	-	-
Optical sensitivity relative to 1 mW of the receiver input minimum	-	-
Attenuation of fiber-optic cable transmission link minimum necessary	-	-
Range at the optical interface depending on the optical fiber used	- -	- -
design of the removable storage C-PLUG	Yes	Yes
Inputs/outputs
Operating voltage of signaling contacts at AC rated value	-	-
Operating current of signaling contacts at AC maximum	-	-
Operating voltage of signaling contacts at DC rated value	24 V	24 V
Operating current of signaling contacts at DC maximum	0.1 A	0.1 A
Supply voltage, current consumption, power loss
Type of supply voltage redundant power supply unit	No	No
Type of voltage of supply voltage	DC	DC
Supply voltage external	24 V	12 V
minimum	18 V	20 V
maximum	32 V	30 V
Product component fusing at power supply input	Yes	Yes
Type of fusing at input for supply voltage
Consumed current maximum	0.7 A	0.7 A
Active power loss
at 24 V for DC	16.6 W	16.6 W
at 230 V AC	-	-
Permitted ambient conditions
Ambient temperature
during operating	-40 … +70 °C	-40 … +70 °C
during storage	-40 … +70 °C	-40 … +70 °C
during transport	-40 … +70 °C	-40 … +70 °C
Comment	Reduced operating temperature through the use of media modules (-40 °C to +70 °C) or SFP plug-in transceivers (-40 °C to +60 °C). If the device is installed in the vertical position, the maximum operating temperature is reduced to +50 °C.	Reduced operating temperature through the use of media modules (-40 °C to +70 °C) or SFP plug-in transceivers (-40 °C to +60 °C). If the device is installed in the vertical position, the maximum operating temperature is reduced to +50 °C.
Relative humidity at 25 °C without condensation during operating maximum	95 %	95 %
Ambient condition for (standard) operation mode	-	-
Protection class IP	IP20	IP20
Design, dimensions and weight
Design	Compact	Compact
Width	120 mm	120 mm
Height	125 mm	125 mm
Depth	124 mm	124 mm
Net weight	1.4 kg	1.4 kg
Type of mounting
Installation 19 inch	No	No
35 mm DIN rail mounting	Yes	Yes
wall mounting	Yes	Yes
S7-300 rail mounting	Yes	Yes
Type of mounting	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted.	When used in shipbuilding, installation on a 35 mm standard mounting rail is not permitted.
Product properties, functions, components general
Cascading in the case of a redundant ring at reconfiguration time of <'~0.3'~s	50	50
Cascading in cases of star structuring	Any (depending only on signal propagation time)	Any (depending only on signal propagation time)
Product functions management, configuration
Product function
CLI	Yes	Yes
web-based management	Yes	Yes
MIB support	Yes	Yes
TRAPs via email	Yes	Yes
Configuration with STEP 7	Yes	Yes
RMON	Yes	Yes
SMTP server	Yes	Yes
Port mirroring	Yes	Yes
CoS	Yes	Yes
for IRT PROFINET IO switch	-	-
PROFINET IO diagnosis	Yes	Yes
switch-managed	Yes	Yes
Protocol is supported
Telnet	Yes	Yes
HTTP	Yes	Yes
HTTPS	Yes	Yes
TFTP	Yes	Yes
FTP	Yes	Yes
BOOTP	Yes	Yes
SNMP v1	Yes	Yes
SNMP v2	Yes	Yes
SNMP v3	Yes	Yes
IGMP (snooping/querier)	Yes	Yes
GMRP	Yes	Yes
DCP	Yes	Yes
LLDP	Yes	Yes
Identification & maintenance
I&M0 - device-specific information	Yes	Yes
I&M1 - plant identification/location name	Yes	Yes
Product functions Diagnosis
Product function
Port diagnostics	Yes	Yes
Statistics Packet Size	Yes	Yes
Statistics packet type	Yes	Yes
Error statistics	Yes	Yes
SysLog	Yes	Yes
Product functions VLAN
Product function
VLAN - port based	Yes	Yes
VLAN dynamic	Yes	Yes
Number of VLANs maximum	255	255
Number of VLANs - dynamic maximum	255	255
Protocol is supported GVRP	Yes	Yes
Product functions DHCP
Product function
DHCP client	Yes	Yes
DHCP Option 82	Yes	Yes
DHCP Option 66	Yes	Yes
DHCP Option 67	Yes	Yes
Product functions Redundancy
Product function
Ring redundancy	Yes	Yes
Redundancy manager	Yes	Yes
Standby redundancy	Yes	Yes
HSR redundancy protocol	Yes	Yes
MRP redundancy protocol	Yes	Yes
redundancy procedure STP	Yes	Yes
RSTP redundancy protocol	Yes	Yes
Passive listening	Yes	Yes
Protocol is supported
STP/RSTP	Yes	Yes
STP	Yes	Yes
RSTP	Yes	Yes
RSTP big network support	Yes	Yes
LACP	Yes	Yes
Product functions Security
Product function
ACL - port/MAC-based	Yes	Yes
IEEE 802.1x (radius)	Yes	Yes
Broadcast/Multicast/Unicast Limiter	Yes	Yes
broadcast blocking	Yes	Yes
Protocol is supported SSH	Yes	Yes
Product functions Time
Product function SICLOCK support	Yes	Yes
Protocol is supported
NTP	No	No
SNTP	Yes	Yes
IEEE 1588 profile default	Yes	Yes
IEEE 1588 profile gPTP	-	-
IEEE 1588 profile PSRC	-	-
Type of time synchronization	-	-
Standards, specifications, approvals
Standard
for EMC from FM	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4	FM3611: Class 1, Division 2, Group A, B, C, D / T4, Class 1, Zone 2, Group IIC, T4
for hazardous zone	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X	EN 60079-0 : 2006, EN 60079-15: 2005, II 3 G Ex nA II T4 KEMA 07 ATEX 0145X
for safety of CSA and UL	UL 60950-1, CSA C22.2 No. 60950-1	UL 60950-1, CSA C22.2 No. 60950-1
for hazardous area of CSA and UL	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4	UL 1604 and UL 2279-15 (Hazardous Location), CSA C22.2 No. 213-M1987, Class 1 / Division 2 / Group A, B, C, D / T4, Class 1 / Zone 2 / Group IIC / T4
for emitted interference	EN 61000-6-4:2007 (Class A)	EN 61000-6-4
for interference immunity	EN 61000-6-2:2005	EN 61000-6-2
Verification of suitability	EN 61000-6-2:2005, EN 61000-6-4:2007	EN 61000-6-2, EN 61000-6-4
CE mark	Yes	Yes
C-Tick	Yes	Yes
Railway application in accordance with EN 50155	-	Yes
Railway application in accordance with EN 50124-1	-	-
Marine classification association
American Bureau of Shipping Europe Ltd. (ABS)	-	-
Bureau Veritas (BV)	-	-
Det Norske Veritas (DNV)	-	-
Germanische Lloyd (GL)	-	-
Lloyds Register of Shipping (LRS)	-	-
Nippon Kaiji Kyokai (NK)	-	-

Код	Заказной номер	Описание	Вес (кг)	Заказать
60603	6AG1308-2FL00-4AA3	siplus net коммутатор scalaнзe x308-2, для тяжёлых условий применения, на основе 6gk5308-2fl00-2aa5	0.75	Заказать
114451	6GK1901-1BB10-2AA0	simatic net ie fc rj45 штекер, 180 rj45, штекерный соединитель с метал. корпусом для пром. условий, предназначен для быстрого монтажа, 180 град. угол вывода кабеля, 1 упаковка = 1 шт.	0.03	Заказать