Demonstration case, opened
The SINAMICS DC MASTER demonstration model is installed ready to be connected-up in a rugged transport case and is immediately ready for operation. It comprises a DC converter 480 V 3 AC, DC 30 A, a 1 kW DC motor as well as numerous options and accessories. The case has two integrated transport wheels and a hinged handle.
The following main components are included in the SINAMICS DC MASTER demonstration case, including all of the required wiring, connection and signal cables:
Free function blocks and Drive Control Chart can be used without any restrictions.
The demonstration case is also available without integrated DC motor to operate an externally mounted DC motor. (The rated converter data must be observed.)
An automation group using a SIMATIC demonstration case together with one or several SINAMICS DC MASTER demonstration cases can be implemented.
SINAMICS DCM demonstration case | |
|---|---|
Line supply connection | |
Supply voltage | 400 V 3 AC (+15 %/-20 %) |
Rated frequency | 45 … 65 Hz |
Connecting cable with 16‑A-CECON connector (5UR5076‑3), length | approx. 4 m |
Line connection fusing required | 16 A |
Dimensions and weights | |
Width | approx. 680 mm |
Height | approx. 700 mm |
Depth | approx. 430 mm |
Weight with integrated DC motor | approx. 70 kg |
Weight without motor | approx. 55 kg |
The converter can be operated from:
A description is provided with the demonstration case. This clearly shows the principle operator panel design and the possible functions of the operator controls.
To use the STARTER commissioning tool users require a programming device or PC. The system requirements are described in section STARTER.
